Passiivse infrapunasensori näidis

Vajaminevad teegid:

lib_deps = ITTIoT

Näidiskood näitab kas PIR on tuvastanud liikumist:

 * IoT PIR example
 * This example subscribe to the "pir" topic. When a message received, then it
 * will switch the pir module "ON" and "OFF"
 * Created 21 Febuary 2018 by Heiko Pikner and Mallor Kingsepp
// Includes global variables and librarys that the PIR shield uses
#include <Arduino.h>
#include <ittiot.h>
#define MODULE_TOPIC "ESP30/pir"
#define WIFI_NAME "name"
#define WIFI_PASSWORD "password"
//Pin definition for the PIR (GPIO14)
#define PIR_PIN D5
//Pin definition for the PIR LED (GPIO16)
#define PIR_LED_PIN D4
// PIR state for detection
bool pirState;
// State that switches PIR on and off
bool onState;
// If message received for PIR topic. For example:
// mosquitto_pub -u test -P test -t "ITT/IOT/3/pir" -m "1"
void iot_received(String topic, String msg)
  Serial.print("MSG FROM USER callback, topic: ");
  Serial.print(" payload: ");
  if(topic == MODULE_TOPIC)
    // Switching the PIR shield on or off, depending what message is received
    if(msg == "1")
  	   onState = true;
    if(msg == "0")
  	   onState = false;
// Function started after the connection to the server is established.
void iot_connected()
  Serial.println("MQTT connected callback");
  // Subscribe to the topic "pir"
  iot.log("IoT PIR example!");
void setup()
  Serial.begin(115200); // setting up serial connection parameter
  //iot.setConfig("wname", WIFI_NAME);
  //iot.setConfig("wpass", WIFI_PASSWORD);
  iot.printConfig(); // Print json config to serial
  iot.setup(); // Initialize IoT library
  // Initialize PIR pin
  pinMode(PIR_PIN, INPUT);
void loop()
  iot.handle(); // IoT behind the plan work, it should be periodically called
  delay(200); // Wait 0.2 seconds
  if(onState == true){
    // This part of the code is executed, when PIR shield is active
      if(pirState == false)
        // When PIR has detected motion, then the LED is switched on and text “Motion detected!” is published to the MQTT broker
        digitalWrite(PIR_LED_PIN, HIGH);
        String msg = String("Motion detected!");
        iot.publishMsg("pir", msg.c_str());
        pirState = true;
      if(pirState == true)
        // PIR shields LED is switched off, when it is not detecting any motion
        digitalWrite(PIR_LED_PIN, LOW);
        pirState = false;
    // When the PIR shield has been switched off, then its offline state is sent to the MQTT broker
    iot.log("PIR offline");
    delay(2000); // Waiting 2 secondes
et/iot/examples/pir.txt · Last modified: 2023/01/28 10:00 (external edit)
CC Attribution-Share Alike 4.0 International Valid CSS Driven by DokuWiki do yourself a favour and use a real browser - get firefox!! Recent changes RSS feed Valid XHTML 1.0