Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
en:iot_homelab_kit:hardware:sensor_module [2017/10/05 07:14] Somepuben:iot_homelab_kit:hardware:sensor_module [2020/07/20 09:00] (current) – external edit 127.0.0.1
Line 1: Line 1:
-====== Sensor Module ======+====== Sensor module ======
    
- Sensor module connects other module devices into the controller+ Sensor module interfaces different sensors and also small actuators like RC servo motor. 
 +Standard sensors which are also included in the kit are: 
 +  * AC Current sensor for power consumption measures 
 +  * Encoder and switch for odometry or speed measure 
 +  * RC servo motor for regulation and small movements
  
-==== Specifications ==== 
  
-  * Two 3,5mm jacket inputs  +{{:en:iot_homelab_kit:hardware:sensor.png?200|}}
-  * 5 front pins+
  
-3.channel socket, 3.5 4 channel socket+{{:en:iot_homelab_kit:hardware:kooder.png?300|}} 
 + 
 +==== Specifications ==== 
 + 
 +  * Two 3,5mm jacket inputs / and 4 channel 
 +  * 5 I/O pin
  
-connector=>socket 
  
 ===== Electrical connection ===== ===== Electrical connection =====
 +
 Sensor I/O is connected to ports: GPIO4, GPIO5, GPIO6, GPIO7, A0 Sensor I/O is connected to ports: GPIO4, GPIO5, GPIO6, GPIO7, A0
en/iot_homelab_kit/hardware/sensor_module.1507187651.txt.gz · Last modified: 2020/07/20 09:00 (external edit)
CC Attribution-Share Alike 4.0 International
www.chimeric.de Valid CSS Driven by DokuWiki do yourself a favour and use a real browser - get firefox!! Recent changes RSS feed Valid XHTML 1.0