Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
en:iot_homelab_kit:hardware:sensor_module [2017/09/29 07:27] Somepuben:iot_homelab_kit:hardware:sensor_module [2020/07/20 09:00] (current) – external edit 127.0.0.1
Line 1: Line 1:
-====== Sensor Module ====== +====== Sensor module ======
- +
    
 + Sensor module interfaces different sensors and also small actuators like RC servo motor.
 +Standard sensors which are also included in the kit are:
 +  * AC Current sensor for power consumption measures
 +  * Encoder and switch for odometry or speed measure
 +  * RC servo motor for regulation and small movements
  
-===== Current ===== 
-Current transformers (CTs) are sensors that are used for measuring alternating current. They are particularly useful for measuring whole building electricity consumption (or generation for that matter). 
-The split core type such as the CT in the picture above, is particularly suitable for DIY use it can be clipped straight on to either the live or neutral wire coming into the building without having to do any high voltage electrical work. 
  
 +{{:en:iot_homelab_kit:hardware:sensor.png?200|}}
  
-{{:en:iot_homelab_kit:hardware:101990028_3.jpg?300|}} +{{:en:iot_homelab_kit:hardware:kooder.png?300|}}
- +
  
 ==== Specifications ==== ==== Specifications ====
  
-  *     Input Current: 0~30A AC+  * Two 3,5mm jacket inputs / 3 and 4 channel 
 +  * 5 I/O pin
  
-  *     Output Mode: DC 0~1V 
- 
-  *     Non-linearity:2-3% 
- 
-  *     Build-in sampling resistance(RL): 62Ω 
- 
-  *     Turn Ratio: 1800:1 
- 
-  *     Resistance Grade: Grade B 
- 
-  *     Work Temperature: -25°C ~ ﹢70°C 
- 
-  *     Dielectric Strength(between shell and output): 1000V AC/1min 5mA 
- 
-  *     Leading Wire in Length: 1m 
- 
-  *     Open Size: 13mm x 13mm 
- 
- 
-===== Encoder ===== 
- 
-A rotary encoder is a type of position sensor which is used for determining the angular position of a rotating shaft. It generates an electrical signal, either analog or digital, according to the rotational movement. 
- 
-By rotating the rotary encoder can be counted in the positive direction and the reverse direction during rotation of the output pulse frequency, unlike potentiometer count, this rotation counts are not limited. With the buttons on the rotary encoder can be reset to its initial state, that starts counting from 0. 
- 
-{{:en:iot_homelab_kit:hardware:kooder.png?300|}} 
- 
-==== Specifications ==== 
-  * Size:  31 x 19 x 29mm 
-  * Pulse circle: 20 
  
 ===== Electrical connection ===== ===== Electrical connection =====
  
-Both Encoder and Current connection is connected to ports: GPIO4, GPIO5, GPIO6, GPIO7, A0+Sensor I/O is connected to ports: GPIO4, GPIO5, GPIO6, GPIO7, A0
en/iot_homelab_kit/hardware/sensor_module.1506670043.txt.gz · Last modified: 2020/07/20 09:00 (external edit)
CC Attribution-Share Alike 4.0 International
www.chimeric.de Valid CSS Driven by DokuWiki do yourself a favour and use a real browser - get firefox!! Recent changes RSS feed Valid XHTML 1.0