Differences

This shows you the differences between two versions of the page.

--- en:raspberry_pi_arduino [2017/12/18 08:54] – Somepub
+++ en:raspberry_pi_arduino [2020/07/20 09:00] (current) – external edit 127.0.0.1
@@ Line 11: / Line 11: @@
 sudo nano /etc/dhcpcd.conf
 Lisa faili:
-          Interface eth0
+Interface eth0
 static ip_address=192.168.1.10/24
@@ Line 42: / Line 42: @@
 sudo apt-get install python-distribute
 sudo easy_install pip
-git clone git://github.com/amperka/ino.git
+git clone github.com/amperka/ino.git
 cd ino-*
 sudo python setup.py install
@@ Line 100: / Line 100: @@
 Minicom käsk: sudo minicom -b 9600 -o -D /dev/ttyACM0
 Serial konsoolist väljumiseks vajuta Ctrl + A ning siis X või Q ja „yes“.
+===== NEW GUIDE =====
+==== Raspberry Conf ====
+  - sudo apt-get update
+  - sudo apt-get arduino
+  - sudo apt-get motion
+  - sudo nano /etc/motion/motion.conf
+  - cd /home/pi ; mkdir sketchbook
+==== DistanceLab Conf ====
+  - Compile : scp -P PORT {waypath}/{build}/{deviceName}.hex USER@IP:/home/USER/sketchbook/{deviceName}.hex
+  - Execute : ssh -p PORT -t -t USER@IP  "/usr/share/arduino/hardware/tools/avrdude -C/usr/share/arduino/hardware/tools/avrdude.conf -v -v -v -v -patmega328p -carduino -P/dev/USBDEVICE -b115200 -D -Uflash:w:/home/USER/sketchbook/{deviceName}.hex"
+==== SSH Conf ====
+  - Try out conf commands
+  - ssh-copy-id USER@IP -p PORT
+  - sudo cp -r /home/repoadmin/.ssh /var/www/

en/raspberry_pi_arduino.1513587298.txt.gz · Last modified: 2020/07/20 09:00 (external edit)