Differences

This shows you the differences between two versions of the page.

--- en:iot_homelab_kit:hardware:relay_module [2017/09/27 07:14] – Somepub
+++ en:iot_homelab_kit:hardware:relay_module [2020/07/20 09:00] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-== Relay Module ==
+====== Relay module ======
-The Relay Shield is an Arduino compatible smart module with 4 mechanical relays providing an easy way to control high voltage. The max switching power is 35VDC 70W for each channel. It can be directly controlled by Arduino/Crowduino through digital IOs with external 9V DC supply.
+Relay module is an electrically operated switch of mains voltage. It means that it can be turned on or off, letting the current go through or not. Many relays use an electromagnet to mechanically operate the switch and provide electrical isolation between two circuits.
-== Features ==
+{{:en:iot_homelab_kit:hardware:relee.png?300|}}
-  *     Arduino,Crowduino, Arduino Mega compatible
+===== Specifications =====
-  *     Automatic control and manual control
-  *     4 mechanical relays with photo-coupled circuit
-  *     Equipped with screw holes for easy installation
-  *     Light weight
-  *     Small form factor
-  *     Extendible
-== Specification ==
+  * 5V 1-Channel Relay interface board
+  * Relay: SRD-05VDC-SL-C (AC 250V 10A, DC 30V 10A NO/NC)
+===== Electrical connection =====
+Connected to port GPIO5
-  *     Voltage: 7~12V
-  *     Current: 8~250mA
-  *     Switching Voltage: Max 35V
-  *     Switching Current : Max 2A
-  *     Frequency Response: -1~1dB
-  *     Switching Power: Max 70W
-  *     Relay Life: > 100000
-== Caution ==
-    Placing 2 layers of electrical tape on the top of the Arduino's usb connector will prevent the relay shield from making contact. Do not operate voltage more than 35V DC.

en/iot_homelab_kit/hardware/relay_module.1506496491.txt.gz · Last modified: 2020/07/20 09:00 (external edit)