Differences

This shows you the differences between two versions of the page.

--- en:iot_homelab_kit:hardware:controller [2017/09/28 07:52] – created Somepub
+++ en:iot_homelab_kit:hardware:controller [2020/07/20 09:00] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-====== Controller ======
+====== Controller module======
+The controller module is a low-cost Wi-Fi chip with full TCP/IP stack and MCU (microcontroller unit) capability. This small module allows microcontrollers to connect to a Wi-Fi network and make simple TCP/IP connections using Hayes-style commands. Controller can be connected with Micro USB connection or with WIFI connection.
+{{:en:iot_homelab_kit:hardware:controller.png?300|}}
+===== Specifications=====
+  * 11 digital input/output pins
+  * Micro USB connector
+  * Compatible with ArduinoIDE
+  * Compatible with  nodemc
+  * 4 MB flash-memory
+===== Electrical connection =====
+Modules are using following I/O ports
+  *     RGB LED Shield GPIO4
+  *     Relay Shield GPIO5
+  *     OLED Display Shield GPIO4, GPIO5
+  *     Motor Shield GPIO4, GPIO5
+  *     Temperature/Humidity DHT Pro Shield GPIO2
+  *     Sensor Shield (ITT ver. 1.1) GPIO4, GPIO5, GPIO6, GPIO7, A0

en/iot_homelab_kit/hardware/controller.1506585145.txt.gz · Last modified: 2020/07/20 09:00 (external edit)