This is an old revision of the document!
Table of Contents
This is a template for the single hands-on-lab scenario description for IO3. This document provides a scenario template (hands-on lab) and should be linked from the laboratory description document labactivitytemplate.
Use it as copy-paste. Do not edit this file, please!
Italic text below should be replaced with yours. Italic text below is just to let you find out easily, what chapters are to be covered when creating document - to distinguish from yours, regular text.
Paragraphs below (in regular, non-italic) should be left as is, eventually adapted if necessary. Project information section should be left as is.
Everything above this line (and including this line) is to be removed in final version.
[Laboratory name]: [Scenario name]
Give few words about this scenario. Provide some objectives and impact on the students.
Target group
This hands-on lab guide is intended for the Beginners/Undergraduates/Masters/Professionals. Choose appropriate.
Prerequisites
Provide prerequisite readings/hardware/software/software libraries/skills if other than stated in the Laboratory Description. If none, remove along with the header. Please note some of those may be common for all scenarios (i.e. mqtt library), so provide it in the laboratory description level, not in the scenario level.
Scenario
Describe scenario to let the user understand its idea and process. Write infromation about the approach, algorithm, etc. (depends on the lab). Provide useful information about protocols, assumptions, adresses (i.e. communication servers), credentials, etc.
Result
Describe expected result when scenario is finished.
Start
Write starting conditions, i.e. what to do at the beginning, what to pay attention before beginning, how the mechanical part should look like, etc.
Steps
Write some extra information if i.e. some steps are optional otherwise cancel this paragraph (but do not remove header).
Step 1
Describe activities done in Step 1.
…
Step n
Describe activities done in Step n.
Result validation
Provide some result validation methods, for self assesment.
FAQ
This section is to be extended as new questions appear.
When using the printed version of this manual please refer to the latest online version of this document to obtain the valid and up-to-date list of the FAQ.
Provide some FAQs in the following form:
Question?: Answer.
Project information
This Intellectual Output was implemented under the Erasmus+ KA2: Strategic Partnership in the Field of Education, Training, and Youth - Higher Education.
Project IOT-OPEN.EU – Innovative Open Education on IoT: improving higher education for European digital global competitiveness.
Project number: 2016-1-PL01-KA203-026471.
Erasmus+ Disclaimer
This project has been funded with support from the European Commission.
This publication reflects the views only of the author, and the Commission cannot be held responsible for any use which may be made of the information contained therein.
Copyright Notice
This content was created by the IOT-OPEN.EU consortium, 2016,2019.
The content is Copyrighted and distributed under CC BY-NC Creative Commons Licence, free for Non-Commercial use.
In case of commercial use, please contact IOT-OPEN.EU consortium representative.
