Differences

This shows you the differences between two versions of the page.

Link to this comparison view

--- en:iot-open:remotelab:itt:remotelights [2018/12/06 06:18] – rim.puks
+++ en:iot-open:remotelab:itt:remotelights [2020/07/20 09:00] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-===== RGB LED module =====
+===== ITT RGB LED module =====
 This laboratory is located in the office of ITT Group in Tallinn, Estonia.
 ==== Introduction  ====
-This laboratory consists of a RGB LED module connected to the ITT IoT controller module. The module contains one RGB LED. This node can be used to create very basic MQTT systems but can also be used as a signaling part of other more complicated systems.
+This laboratory consists of an RGB LED module connected to the ITT IoT controller module. The module contains one RGB LED. This node can be used to create very basic MQTT systems but can also be used as a signalling part of other more complicated systems.
 {{:en:iot_homelab_kit:hardware:led2.png?200 |}}
@@ Line 26: / Line 26: @@
 === Software, libraries and externals ===
-To control WS2812B RGB LED the following libaries are used:
+To control WS2812B RGB LED the following libraries are used:
   * ITTIoT libary - used to program the controller module.
   * Adafruit NeoPixel libary - used to control the RGB LED.
@@ Line 34: / Line 34: @@
 === Limits ===
-At the same time one user can program the controller. But all users connected to the Distancelab MQTT broker can control the RGB LED, assuming they use the topic described in the controller program.
+At the same time, one user can program the controller. But all users connected to the Distancelab MQTT broker can control the RGB LED, assuming they use the topic described in the controller program.
 ==== Hands-on labs ====
-//List study scenarios (hands-on labs), linking to the Dokuwiki pages with hands-on labs descriptions (there should be a separate page for each scenario). Classify each scenario and refer to the target group using starting keywords:
-  * Beginners
+=== Example code ===
-  * Undergraduates
+<code c>
-  * Masters
+#include <Arduino.h>
-  * Professionals
+#include <ittiot.h>
-Note, assume that more professional group automatically contains less professional ones. Note - use language and as appropriate to the target group, i.e.://
+#include <Adafruit_NeoPixel.h>
-<code>
-  * Beginners: Elementary operations on the Arduino 2x16 LCD screen.
+#define PIN            D2
-  * Undergraduates: Visualizing temperature and humidity on the remote screen.
-  * Masters: Using power saving states to limit power consumption.
+// When we setup the NeoPixel library, we tell it how many pixels,
+// and which pin to use to send signals.
+// Note that for older NeoPixel strips you might need to change
+// the third parameter--see the strandtest
+// example for more information on possible values.
+Adafruit_NeoPixel pixels = Adafruit_NeoPixel(1, PIN, NEO_GRB + NEO_KHZ800);
+// https://stackoverflow.com/questions/9072320/split-string-into-string-array
+String getValue(String data, char separator, int index)
+{
+  int found = 0;
+  int strIndex[] = {0, -1};
+  int maxIndex = data.length()-1;
+  for(int i=0; i<=maxIndex && found<=index; i++)
+  {
+    if(data.charAt(i)==separator || i==maxIndex)
+    {
+        found++;
+        strIndex[0] = strIndex[1]+1;
+        strIndex[1] = (i == maxIndex) ? i+1 : i;
+    }
+  }
+  return found>index ? data.substring(strIndex[0], strIndex[1]) : "";
+}
+// Change RGB LED color
+// mosquitto_pub -u test -P test -t "ITT/IOT/3/rgb" -m "51;255;153"
+void iot_received(String topic, String msg)
+{
+  Serial.print("MSG FROM USER callback, topic: ");
+  Serial.print(topic);
+  Serial.print(" payload: ");
+  Serial.println(msg);
+  String r = getValue(msg,';',0);
+  String g = getValue(msg,';',1);
+  String b = getValue(msg,';',2);
+  Serial.print("R: ");
+  Serial.println(r);
+  Serial.print("G: ");
+  Serial.println(g);
+  Serial.print("B: ");
+  Serial.println(b);
+  // Moderately bright green color.
+  pixels.setPixelColor(0, r.toInt(), g.toInt(), b.toInt());
+  pixels.show(); // This sends the updated pixel color to the hardware.
+}
+void iot_connected()
+{
+  Serial.println("MQTT connected callback");
+  iot.subscribe("rgb");
+  iot.log("IoT NeoPixel example!");
+}
+void setup()
+{
+  Serial.begin(115200);
+  Serial.println("Booting");
+  iot.printConfig(); // print json config to serial
+  iot.setup();
+  pixels.begin(); // This initializes the NeoPixel library.
+}
+void loop()
+{
+  iot.handle();
+  delay(200);
+}
 </code>
 ==== Support ====
-//Give some information on how to access help, how to get support in case of the trouble etc.//
+info@ittgroup.ee

en/iot-open/remotelab/itt/remotelights.1544077095.txt.gz · Last modified: 2020/07/20 09:00 (external edit)