Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
en:iot-open:practical:hardware:sut:stm32:emb1b_1 [2024/04/21 08:35] – [Steps] ktokarzen:iot-open:practical:hardware:sut:stm32:emb1b_1 [2024/04/21 09:41] (current) – [FAQ] ktokarz
Line 92: Line 92:
  
 ===== FAQ ===== ===== FAQ =====
-**I've got NaN (Not a Number) readings. What to do?**: Check if GPIO is OK (should be 47), check if you initialised controller class and most of all, give the sensor some recovery time (at least 250ms) between consecutive readings.+**I've got NaN (Not a Number) readings. What to do?**: Check if the I2C address corresponds to the BME280 sensor (should be 0x76), check if you initialised controller class and most of all, give the sensor some recovery time (at least 250ms) between consecutive readings.
  
 <WRAP noprint> <WRAP noprint>
en/iot-open/practical/hardware/sut/stm32/emb1b_1.1713688556.txt.gz · Last modified: 2024/04/21 08:35 by ktokarz
CC Attribution-Share Alike 4.0 International
www.chimeric.de Valid CSS Driven by DokuWiki do yourself a favour and use a real browser - get firefox!! Recent changes RSS feed Valid XHTML 1.0