Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | |
| en:iot-open:practical:hardware:sut:esp32:iot_9 [2024/05/04 09:06] – ktokarz | en:iot-open:practical:hardware:sut:esp32:iot_9 [2024/05/04 09:20] (current) – ktokarz |
|---|
| |
| ==== Steps ==== | ==== Steps ==== |
| We will pass through the lab in a few steps. We will add the second characteristic to the example from lab [[en:iot-open:practical:hardware:sut:esp32:IoT_8]]. We will configure this characteristic as notify/indicate capable. It allows us to establish a connection and, if successfully connected, enable the indication or notification feature. With this feature enabled peripheral device initiates data transmission. It can be used for periodic measurement reading or updating information on value change. | We will pass through the lab in a few steps. We will add the second characteristic to the example from lab [[en:iot-open:practical:hardware:sut:esp32:IoT_8]]. We will configure this characteristic as notify/indicate capable. It allows us to establish a connection and, if successfully connected, enable the indication or notification feature. With this feature enabled, the peripheral device initiates data transmission. It can be used for periodic measurement reading or updating information on value change. |
| |
| === Step 1 === | === Step 1 === |
