Differences

This shows you the differences between two versions of the page.

--- en:iot-open:practical:hardware:sut:esp32:emb10_1 [2024/03/22 10:00] – [Project information] pczekalski
+++ en:iot-open:practical:hardware:sut:esp32:emb10_1 [2024/04/09 12:58] (current) – [Result validation] pczekalski
@@ Line 62: / Line 62: @@
 delay(2000);
 </code>
+===== FAQ =====
+**How do I know minimum and maximum values for the timings for servo operation?**: Those parameters are provided along with servo technical documentation, so you should refer to them. Our configuration reflects the servos we use (MG90/SG90), and as you can see, it goes far beyond the standard servo rotation control that is a minimum of 1000us and a maximum of 2000us. Using standard configuration, your servo won't rotate at full 180 degrees but at a shorter rotation range.
 ==== Result validation ====
-Observe the red arrow to rotate accordingly. Remember to give is some time to operate.
+Observe the red arrow to rotate accordingly. Remember to give the servo some time to operate.
 <WRAP noprint>

en/iot-open/practical/hardware/sut/esp32/emb10_1.1711101646.txt.gz · Last modified: 2024/03/22 10:00 by pczekalski