Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | |
| en:iot-open:practical:hardware:ittgroup:atmel:scenarios [2025/09/02 09:00] – raivo.sell | en:iot-open:practical:hardware:ittgroup:atmel:scenarios [2025/10/03 11:29] (current) – pczekalski |
|---|
| <note>The remote access lab does not provide direct access to the serial port or debugger. For this reason, understanding actuators (mostly displays and LEDs) is essential, because the only way to monitor execution is to observe the results remotely via the video stream.</note> | <note>The remote access lab does not provide direct access to the serial port or debugger. For this reason, understanding actuators (mostly displays and LEDs) is essential, because the only way to monitor execution is to observe the results remotely via the video stream.</note> |
| |
| <note important>Video streaming has limitations such as frame rate, resolution, and colour rendering. This impacts how you write the software, e.g., avoid rapid screen updates or subtle LED changes that may not be visible through the video stream.</note> | <note important>Video streaming has limitations, including frame rate, resolution, and colour rendering. This impacts how you write the software; for example, avoid rapid screen updates or subtle LED changes that may not be visible through the video stream.</note> |
| |
| ** Know the hardware **\\ | ** Know the hardware **\\ |
| The following scenarios explain the use of hardware components and services that constitute the ITT AVR laboratory node. They introduce students to embedded systems by starting with simple actuators and sensors before moving on to more complex control tasks. | The following scenarios illustrate the utilisation of hardware components and services that comprise the ITT AVR laboratory node. They introduce students to embedded systems by starting with simple actuators and sensors before moving on to more complex control tasks. |
| |
| * [[en:iot-open:practical:hardware:itt:avr:led|How do you use a light-emitting diode (LED)?]] | * [[en:iot-open:practical:hardware:itt:avr:led|How do you use a light-emitting diode (LED)?]] |
