Differences

This shows you the differences between two versions of the page.

--- en:examples:setup:avrstudio [2012/05/29 11:51] – created raivo.sell
+++ en:examples:setup:avrstudio [2020/07/20 09:00] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-====== AVR for Windows ATMega128 ======
+====== AVR Studio 4 ======
 This section contains the information necessary to install AVR development software on Windows operating system.
@@ Line 22: / Line 22: @@
 ==== For ATmega2561 based Robotic HomeLab ====
+**4a. JTAG liides**
+JTAG liides - HappyJTAG2 on liides programmaatori ja AVR Studio vahele. Tarkvara on pakitud zip failiks ja piisab selle lahtipakkimisest soovitud kataloogi näiteks C:\WinAVR (tarkvara eraldi paigaldada ei ole vaja)
+{{:software:happyjtag2_for_homelab.zip|HappyJTAG2 for HomeLab}}
+**5a. Programmaatori ajur**
+Ajur võimaldab arvutiga ühendada programmaatori, mis asub kontrolleri plaadil. Kui ühendada kontrollerplaat arvutiga USB liidese kaudu peaks Windows teostama automaatse paigalduse (Windows 7). Kui avada paigalduse protsessi aken peaks nägema umbes järgmisi teateid:
+{{  :software:jtag:driver.png?400  |}}
+{{  :software:jtag:driver2.png?400  |}}
+Enne järgmist sammu tuleks oodata, kuni paigaldamine on täielikult valmis.
 ==== For ATmega128 based Robotic HomeLab ====
-**4. Virtual COM port driver**
+**4b. Virtual COM port driver**
 Driver enables to connect USB JTAG-ICE programmer with your PC. Driver have to be installed before connecting the programmer. Driver file name is "CDM x.xx.xx.exe", where "x" denotes the version number. After installing the driver you can connect the JTAG-ICE programmer through the USB port and let Windows to detect the device automatically. You should see the notice on the windows task bar.

en/examples/setup/avrstudio.1338292296.txt.gz · Last modified: 2020/07/20 09:00 (external edit)