This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | |||
en:iot-open:practical:hardware:sut:stm32:emb7_1 [2024/04/20 16:58] – ktokarz | en:iot-open:practical:hardware:sut:stm32:emb7_1 [2024/04/25 19:17] (current) – [STM_7: Using OLED display in STM32WB55] ktokarz | ||
---|---|---|---|
Line 1: | Line 1: | ||
- | ====== STM_7: Using OLED display | + | ====== STM_7: Using OLED display ===== |
This scenario presents how to use the OLED display connected to the STM32WB55 SoC. Our OLED display is an RGB (16bit colour, 64k colours) 1.5in, 128x128 pixels. The OLED chip is SSD1351, and it is controlled over the SPI interface using the pin configuration as described in STM32 node Hardware Reference in Table 1 STM32WB55 Node Hardware Details. | This scenario presents how to use the OLED display connected to the STM32WB55 SoC. Our OLED display is an RGB (16bit colour, 64k colours) 1.5in, 128x128 pixels. The OLED chip is SSD1351, and it is controlled over the SPI interface using the pin configuration as described in STM32 node Hardware Reference in Table 1 STM32WB55 Node Hardware Details. | ||