Differences

This shows you the differences between two versions of the page.

--- en:projects:introduction [2010/03/04 07:36] – kristiseppa
+++ en:projects:introduction [2020/07/20 09:00] (current) – external edit 127.0.0.1
@@ Line 2: / Line 2: @@
 In order to engineer a simple mechatronic device it is needed to project the construction and mechanics, electronics and sensors, control system and software for this device.
-At the end of the project a report should be compiled. It is a documentation that should at least consist following content points:
+At the end of the project a report should be compiled. It is a documentation which should at least consist following content points:
-  * **Title page **
+  * **Titlepage **
   * **Summary**
   * **Summary (in foreign language)**
   * **Table of contents**
-    - **Terms of reference**
+    - **Initial task**
-    - **System requirements and restrictions**
+    - **System requirements and limitations**
-    - **The overall system model** \\ Structure and functionality of a system as block diagrams. In addition, instructions for use diagram, interface diagram etc. can be composed.
+    - **The overall system model** \\ Structure and functionality of a system as block diagrams. In addition, instructions for use case diagram, interface diagram etc. can be composed.
-    - **Ideelahendused** \\ Vähemalt kolm erinevat kontseptuaalset lahendust, kuidas antud ülesanne lahendada. Sobivad täiesti skaneeritud käsitsi visandatud skeemid, visandid jms. documentation with comments.
+    - **Design solutions** \\ At least three different conceptual solutions of how to solve the task. Suitable are manually sketched diagrams, sketches etc. Documentation with comments.
-    - **Mechanics** \\ Soovitatavalt 3D mudel koos oluliste sõlmede tööjooniste ja valmistamisjuhistega. Kui mingi sõlm nõuab erijuhiseid koostamiseks, siis ka koostejoonis ja juhendid, võimaluse korral animatsioon süsteemi toimimisest.
+    - **Mechanics** \\ Preferably a 3D model with drawings of essential nodes and engineering instructions. If a node requires special instructions, then assembly drawings and instructions as well. If possible, add an animation on functioning of the system.
-    - **Electronics** \\ General block diagram, where all the used modules are showed (the so called controller, motor actuator, motor, encoder etc. and their connections). Võimalusel standardne elektroonikaskeem ja trükkplaadi montaažiskeem.
+    - **Electronics** \\ Give the overall block diagram, where all the used modules are showed (controller, motor actuator, motor, encoder etc. and their connections). At opportunity provide a standard electronic unit and PCB assembly layout.
-    - **Control system** \\ Juhtimise algoritm ja algkood. Kui on kasutatud omaloodud funktsioone, siis ka funktsioonide ja parameetrite tabel, katkestuste prioriteetide tabel jms.
+    - **Control system** \\ Control algorithm and source code. If self made functions are used, then provide a table of functions and parameters, table of interruption priorities etc.
-    - **Valmislahendus** \\ Description and pictures
+    - **Ready-to-use solution** \\ Description and pictures
-    - **Majanduskalkulatsioonid** \\ The list of components with cost, time estimates and the like.
+    - **Economic calculation** \\ The list of components with cost, time estimates etc.
-    - **Project management** \\ The project schedule, resource allocation, division of labor, the crew's contribution, the minutes of meetings and the like.
+    - **Project management** \\ The project schedule, resource allocation, division of labor, the crew's contribution, the minutes of meetings etc.
-    - **Summary and conclusions** \\ What was difficult, what would you do differently, mida projekt andis jne. In the summary a short description of the work done, problems encountered and a description of the outcome are outlined. Samuti on kokkuvõttesse hea lisada oma arvamus projekti vajalikkusest, mida see annab projekti liikmele, mida teeks tulevikus teisiti, mida õpiti ja mida soovitatakse juhendajale ja projekti korraldajatele.
+    - **Summary and conclusions** \\ What was difficult, what would you do differently, what you gained from the project etc. In the summary a short description of the work done, problems encountered and a description of the outcome should be outlined. It is also good to add your opinion on the necessity of the project, what it offers to the members of the project and what should be done differently in the future, what was learned and what would be suggested to the supervisors and organizers of the project.
-  * **References**
+  * **References and materials used**
   * **Annexes**
-The following example project is a measure of how to compile a documentation and a report on the project.  Unfortunately, the report is in an abbreviated form due to the limited volume of this book, but it is aimed to show the different aspects of documentation.
+The following example project is a sample of how to compile a documentation and a report on the project.  Unfortunately, the report is in an abbreviated form due to the limited volume of this book, but it is aimed to show the different aspects of documentation.

en/projects/introduction.1267688219.txt.gz · Last modified: 2020/07/20 09:00 (external edit)