Differences

This shows you the differences between two versions of the page.

Link to this comparison view

--- en:iot:examples:setup:debugging [2019/02/06 09:47] – rim.puks
+++ en:iot:examples:setup:debugging [2021/03/06 10:00] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ===== Debugging =====
-The recommended debugging software for the IoT modules is MQTTBox (which can be downloaded [[http://workswithweb.com/mqttbox.html|here]]). MQTTBox is an easy to use software that allows publishing and subscribing to various topics.
+The recommended MQTT Client software for the IoT modules is MQTT.fx. MQTT.fx is an easy-to-use software that allows publishing and subscribing to various topics. Alternatively, an MQTTBox can be used as a replacement.
-====Setting up the MQTTBox====
+  * [[en:iot:examples:debugging:mqttfx|MQTT.fx installation and user guide.]]
+  * [[en:iot:examples:debugging:mqttbox|MQTTBox installation and user guide.]]
-The first step after opening the program is creating a new MQTT client.
-{{:en:iot:examples:setup:mqttbox_create_mqtt_client.png?300|}}
-Here you have to configure the client to connect with your selected MQTT broker.
-The important fields are on the picture below, you can leave the rest on their default settings.
-  * **MQTT Client name** - Write a name for this settings file. A good idea is to name it after the broker you are connecting to.
-  * **MQTT Client Id** - This is the name you set for your individual device. There should be only one device with this name connected with your broker.
-  * **Protocol** - This is the protocol used for this connection. It should be mqtt/tcp when using the Raspberry broker and mqtts/tls when using the Distancelab one.
-  * **Host** - Here enter the IP (or URL) and the port of the broker. It should be formatted as "111.111.111.111:1234", first IP address and then colon and port address.
-  * **Username and password** - If your broker has username and password enabled then enter those.
-{{:en:iot:examples:setup:mqttbox_settings.png?300|}}
+USB Serial Port can be used for debugging IoT kits. For this, a serial terminal is needed. One of the most advanced serial terminals is a RealTerm, allowing view and log data in different formats and manually reset the IoT modules.
+  * [[en:iot:examples:debugging:realterm|RealTerm Serial/TCP Terminal.]]

en/iot/examples/setup/debugging.1549446429.txt.gz · Last modified: 2020/07/20 09:00 (external edit)