Differences

This shows you the differences between two versions of the page.

Link to this comparison view

--- en:iot:examples:setup:arcconf [2019/02/20 14:29] – rim.puks
+++ en:iot:examples:setup:arcconf [Unknown date] (current) – external edit (Unknown date) 127.0.0.1
@@ Line 13: / Line 13: @@
 ====Connecting to the module====
-If you power on the module for the first time, it will go to Boot mode. That means it will create a Wifi access point that you can connect to with your laptop. That happens every time the module cannot connect to the router or the broker.
+If you run [[en:iot:examples:setup:confmode|Configuration mode example]] and push a button, then the module will go to configuration mode. That means it will create a Wifi access point that you can connect to with your laptop.
-{{:en:iot:examples:setup:iotmodulealgorithm.png?300|}}
+After that, you should see it in the Wifi list of your device.
-After the module is powered on, you should see it in the Wifi list of your device.
 {{:en:iot:examples:setup:wifi.png?300|}}
-NB! If you want to reconfigure the module you have to first disable (or move out of range) the current router the module is configured to. That is because if the module can connect to the router and broker defined, it does not create an access point.
 ====Handling the ARC program====
@@ Line 31: / Line 26: @@
 ^Field^Description^
-|dname|Name of the controller module. It is recommended to write the name on the module to avoid getting them mixed up.|
+|dname|Name of the controller module. It is recommended to write the name physically on the module to avoid getting them mixed up.|
 |wname|The SSID of the Wifi router you wish to connect to|
 |wpass|The password for that Wifi connection|
@@ Line 41: / Line 36: @@
 {{:en:iot:examples:setup:arc_settings.png?600|}}
+Once you have configured the fields as necessary press SEND to upload the configuration to the module. After a few seconds the following success indicator should appear after the body field. If it fails check if the connection with the module is still active and if you do not have any formatting mistakes.
+{{:en:iot:examples:setup:success.png?300|}}

en/iot/examples/setup/arcconf.1550672981.txt.gz · Last modified: 2020/07/20 09:00 (external edit)