This is an old revision of the document!
You can download it from here
At the end of the installation make sure the “register Realterm automation server and aux wrapper” option is checked.
NB: When using the homelab kit first connect the module to the PC and download/install the CH341SER driver here. More info can be found here
Under Port set the Baud to 115200 and Port to the a device serial.
If you are successfully connected you should see the outgoing device information in the upper panel.
To send information you can do so under Send and entering text or numbers into one of the two textboxes. To send text press the Send ASCII button.
To see the information you send go under Display and check the Half Duplex option.