Differences

This shows you the differences between two versions of the page.

--- en:iot-open:practical:hardware:itsilesia:esp32 [2025/08/31 12:51] – [Application Layer Services] pczekalski
+++ en:iot-open:practical:hardware:itsilesia:esp32 [2025/08/31 12:53] (current) – [Networking Layer] pczekalski
@@ Line 71: / Line 71: @@
 Gateway is 192.168.0.1, and it is also the address of the IoT VREL management service for accessing devices: [[http://192.168.0.1]].
 <note warning>Note, even if available, the system WILL NOT work using the public IP address.</note>
+In this laboratory module, for simplicity and portability of the solution, all clients connect to a single, private, NATed network, including IoT devices and clients (developers/students).
+All IoT integration services are also available via this network.
 ==== Application Layer Services ====
-There are currently 2 application-layer services available:
+There are currently 2 application-layer services available, accessible for IoT nodes when connected to the VRELlab network:
   * MQTT broker:
     * IP addresses: 192.168.0.1;
@@ Line 84: / Line 87: @@
     * Port: 5683 (UDP)
     * Endpoints:
-      * GET method for <code>coap://192.168.0.10/</code> that brings you a secret code in the message's payload,
+      * GET method for <code>coap://192.168.0.1/</code> that brings you a secret code in the message's payload,
-      * GET method for <code>coap://192.168.0.10/hello</code> that brings you a hello world welcome message in the payload.
+      * GET method for <code>coap://192.168.0.1/hello</code> that brings you a hello world welcome message in the payload.

en/iot-open/practical/hardware/itsilesia/esp32.1756644695.txt.gz · Last modified: 2025/08/31 12:51 by pczekalski